|
Mubychem Group, established in 1976, is the pioneer manufacturer of Potassium Alum, Aluminum Potassium Sulfate, Potash Alum, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc. |
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Potassium Alum, Aluminum Potassium Sulfate, Potash Alum Manufacturers, MSDS Sheet
Potash Alum
Technical & Pure Crystals
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Potassium Alum MSDS Sheet, Material safety Data Sheet
1. Product Identification
Synonyms: Sulfuric acid, aluminum potassium salt (2:1:1),
dodecahydrate; potassium alum dodecahydrate; Alum Potassium USP Powder
TAC; Potassium alum; Potash alum; Alum; Kalinite
CAS No.: 10043-67-1 (Anhydrous) 7784-24-9 (Dodecahydrate)
Molecular Weight: 474.38
Chemical Formula: AlK(SO4)2 12H2O
2. Composition/Information on Ingredients
Ingredient:
Sulfuric Acid, Aluminum Potassium Salt (2:1:1) or Potash Alum or
Potassium Alum or Aluminum Potassium Sulfate
CAS No.: 10043-67-1
Percent: 98 - 100%
Hazardous: Yes
3. Hazards Identification
Potential Acute Health Effects: Potash Alum is hazardous in case of skin
contact (irritant), of eye contact (irritant), of ingestion, of
inhalation.
Potential Chronic Health Effects:
Carcinogenic Effects: Not available.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Repeated or prolonged exposure is not known to aggravate medical
condition.
4. First Aid Measures
Inhalation:
If Potassium Alum or Aluminum Potassium Sulfate is inhaled, remove to
fresh air. If not breathing, give artificial respiration. If breathing
is difficult, give oxygen. Get medical attention.
Ingestion:
If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water.
Never give anything by mouth to an unconscious person. Get medical
attention immediately.
Skin Contact:
In case of contact with Potash Alum, immediately flush skin with plenty of water. Cover
the irritated skin with an emollient. Remove contaminated clothing and
shoes. Cold water may be used. Wash clothing before reuse. Thoroughly
clean shoes before reuse. Get medical attention.
Eye Contact:
Check for and remove any contact lenses. In case of contact, immediately
flush eyes with plenty of water for at least 15 minutes. Cold water may
be used. Get medical attention.
5. Fire Fighting Measures
Fire:
Potassium Alum or Aluminum Potassium Sulfate is not considered to be a
fire hazard.
Explosion: Potash Alum is not considered to be an explosion hazard.
Fire Extinguishing Media:
Use any means suitable for extinguishing surrounding fire. Keep in mind
that addition of water can cause the formation of sulfuric acid.
Special Information:
In the event of a fire, wear full protective clothing and NIOSH-approved
self-contained breathing apparatus with full face piece operated in the
pressure demand or other positive pressure mode.
6. Accidental Release Measures
Cover spill with soda ash and mix. Ventilate area of leak or spill. Keep unnecessary and unprotected people away from area of spill. Wear appropriate personal protective equipment. Pick up spills and place in a suitable container for reclamation or disposal, using a method that does not generate dust.
7. Handling and Storage
Keep Potassium Alum or Aluminum Potassium Sulfate in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of Potassium Alum or Aluminum Potassium Sulfate may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product Potash Alum.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits:
-OSHA Permissible Exposure Limit (PEL):
15 mg/m3 (TWA) total dust and 5 mg/m3 (TWA)
respirable fraction for Aluminum metal as Al.
-ACGIH Threshold Limit Value (TLV):
1 mg/m3 respirable fraction (TWA), Aluminum metal and Insoluble
compounds, A4.
Ventilation System:
A system of local and/or general exhaust is recommended to keep employee
exposures below the Airborne Exposure Limits. Local exhaust ventilation
is generally preferred because it can control the emissions of the
contaminant at its source, preventing dispersion of it into the general
work area. Please refer to the ACGIH document, Industrial
Ventilation, A Manual of Recommended Practices, most recent edition,
for details.
Personal Respirators (NIOSH Approved):
If the exposure limit is exceeded and engineering controls are not
feasible, a half face piece particulate respirator (NIOSH type N95 or
better filters) may be worn for up to ten times the exposure limit or
the maximum use concentration specified by the appropriate regulatory
agency or respirator supplier, whichever is lowest.. A full-face piece
particulate respirator (NIOSH type N100 filters) may be worn up to 50
times the exposure limit, or the maximum use concentration specified by
the appropriate regulatory agency, or respirator supplier, whichever is
lowest. If oil particles (e.g. lubricants, cutting fluids, glycerin,
etc.) are present, use a NIOSH type R or P filter. For emergencies or
instances where the exposure levels are not known, use a full-face piece
positive-pressure, air-supplied respirator. WARNING: Air-purifying
respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection:
Wear impervious protective clothing, including boots, gloves, lab coat,
apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection:
Use chemical safety goggles and/or full face shield where dusting or
splashing of solutions is possible. Maintain eye wash fountain and
quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Potassium Alum or Aluminum Potassium Sulfate is
colorless crystals.
Odor: Potash Alum is odorless.
Solubility: 14% in water, 333% in boiling water
Density: 1.73
pH: 3.3 (0.2 M solution)
% Volatiles by volume @ 21C (70F): 0
Boiling Point: ca. 200C (ca. 392F) Loses water
Melting Point: 92.5C (198F)
10. Stability and Reactivity
Stability: Potassium Alum or Aluminum Potassium Sulfate is stable
under ordinary conditions of use and storage.
Hazardous Decomposition Products: Hydrolyzes to form dilute
sulfuric acid. Toxic and corrosive oxides of sulfur may be formed when
heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Potash Alum is corrosive to metals in the presence of water.
Conditions to Avoid: Moisture and incompatibles.
11. Toxicological Information
Investigated as a reproductive effector.
--------\Cancer Lists\------------- ------------------------
----------------- ----------------- NTP Carcinogen---
Ingredient ------------------------ Known Anticipated IARC Category
----------------------------------- ----- ----------- ----
Sulfuric Acid, Aluminum Potassium - No -- No -------- None
Salt (2:1:1) (10043-67-1)
12. Ecological Information
Environmental Fate: No information found.
Environmental Toxicity: No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Potash Alum in accordance with federal, state and local requirements.
14. Transport Information
Not regulated.
15. Regulatory Information
--------\Chemical Inventory Status - Part 1\---------------------------------
Ingredient TSCA EC Japan Australia
----------------------------------------------- ---- --- ----- ---------
Sulfuric Acid, Aluminum Potassium Salt (2:1:1) Yes Yes Yes Yes
(10043-67-1)
--------\Chemical Inventory Status - Part 2\---------------------------------
--Canada--
Ingredient Korea DSL NDSL Phil.
----------------------------------------------- ----- --- ---- -----
Sulfuric Acid, Aluminum Potassium Salt (2:1:1) Yes Yes No Yes
(10043-67-1)
--------\Federal, State & International Regulations - Part 1\----------------
-SARA 302- ------SARA 313------
Ingredient RQ TPQ List Chemical Catg.
----------------------------------------- --- ----- ---- --------------
Sulfuric Acid, Aluminum Potassium Salt No No No No
(2:1:1) (10043-67-1)
--------\Federal, State & International Regulations - Part 2\----------------
-RCRA- -TSCA-
Ingredient CERCLA 261.33 8(d)
----------------------------------------- ------ ------ ------
Sulfuric Acid, Aluminum Potassium Salt No No No
(2:1:1) (10043-67-1)
Chemical Weapons Convention: No; TSCA 12(b): No; CDTA: No
SARA 311/312: Acute: Yes; Chronic: No; Fire: No; Pressure: No
Reactivity: No (Pure / Solid)
Australian Hazchem Code: None allocated.Poison Schedule: None allocated.
16. Other Information
NFPA Ratings: Health: 1 Flammability: 0
Reactivity: 0
Label Hazard Warning:
WARNING! HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN,
EYES AND RESPIRATORY TRACT.
Label Precautions:
Avoid breathing dust.
Keep container closed.
Use only with adequate ventilation.
Wash thoroughly after handling.
Avoid contact with eyes, skin and clothing.
Label First Aid:
If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water.
Never give anything by mouth to an unconscious person. If inhaled,
remove to fresh air. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. In case of contact, wipe off excess
material from skin then immediately flush eyes or skin with plenty of
water for at least 15 minutes. Remove contaminated clothing and shoes.
Wash clothing before reuse. In all cases, get medical attention.
Disclaimer:
******************************
Our company provides this Potassium Alum or Aluminum Potassium
Sulfate MSDS information sheet contained herein in good faith but makes no
representation as to its comprehensiveness or accuracy. This Potash
Alum Potassium
Alum or Aluminum Potassium Sulphate MSDS sheet
is intended only as a guide to the appropriate precautionary
handling of the material by a properly trained person using this
product. Individuals receiving the information must exercise their
independent judgment in determining its appropriateness for a particular
purpose.
******************************
Potash Alum Potassium Alum manufacturers
Aluminum Potassium Sulfate Sulphate Manufacturers at:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Potassium Alum or Potash Alum or Aluminum Potassium Sulphate Aluminium Potassium Sulphate Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.